32GB Hidden Spy Smart Car Keychain Camera Recorder
(0)
See All Review
Wishlist
6,99912,99946% Off
SKU : 32GBSPYCARKEY
Brand : VisionXP
Warranty : No Warranty
32GB Hidden Spy Smart Car Keychain Camera Recorder Get Secret Evidence for Life
About this item (Concealed Design)
the car key is common in everyday life, it is not easy to attract attention when recording video and audio.
Easy and Convenient to Use
The car key can be switched between three modes: video recording mode, motion detection mode, and photo taking mode.. The hidden car key camera doesn't need WiFi or app. You can take it to any outdoor or indoor place without any network limitation, which is very convenient.
Support up to 32GB Micro SD Card
The memory card from 4GB to 256GB, allowing you to record video for long periods of time. The car key camera has a loop recording function that overwrites the oldest videos if the memory card is full. ( The memory card is an optional accessory. )
HD Video Effect
Video supports a resolution of 1920 x 1080 pixels and a high-resolution frame rate of 30 fps. The lens does not have an autofocus function, which may affect the recording effect when moving quickly. Night vision is not supported
Battery Capacity
1000mAh, the super battery life. It can record continuously for a long time about 2 hours, will not miss all the exciting moments. Take the video you want to take anytime ,anywhere.
32GB Hidden Spy Smart Car Keychain Camera Recorder Best Evidence for Life
Operation method
1. On/off Mode:
Please remember to insert the TF card into the device before operating any functions. Then long press the Power Button C, the blue and red lights will stay on and it is in standby mode. If the machine does not detect the TF card, the red and blue lights will flash 10 times at the same time and enter the shutdown state.
Operation method
Long press the Power Button C, the red and blue lights will stay on and it is in standby mode. If the machine does not detect the TF card, the red and blue lights will flash 10 times at the same time and enter the shutdown state.
2. Video Recording Mode & Photo Taking Mode:
Short press the Video Mode Button A once, the blue light slowly flashes 5 times and then goes out, it starts recording automatically.
Short press the Power Button C, the blue light stays on, and the device saves the video and enters the standby mode. If you short press the Video Mode Button A again, the device will continue to enter the video recording mode.
When the device is in the standby mode state, If you press the Video Mode button A twice continuously, the blue light flashes once and stays on, indicating that a photo is taken.
3. Motion Detection Mode & Photo Taking Mode :
When the device is in the standby mode state. Long press the Motion Detection Button B for 5 seconds, the red light slowly flashes 5 times and then goes out, it starts entering motion detection recording mode.
Short press the Power Button C, the red light stays on, and the device saves the video and enters the standby mode. If you short press the Motion Detection Button B again, the device will continue to enter the motion detection recording mode.
When the device is in the standby mode state, If you press the Motion Detection Button B twice continuously, the red light flashes once and stays on, indicating that a photo is taken.
4: Mode Switching Function:
During the Video Recording Mode process, press and hold the Motion Detection Button B for 10 seconds, and the red light flashes 10 times to enter the Motion Detection Mode.
During the Motion Detection Mode process, press and hold the Video Mode Button A for 10 seconds, and the blue light flashes 10 times to enter the Video Recording Mode.
5: Reset the device:
If the device does not operate properly, you can use an extractor pin to press and hold the Reset Button D to restore to factory settings
6: Shutdown the device :
Press and hold the Power Button C for 5 seconds, the red and blue lights flash 3 times, and the indicator light goes out. At this time, the video file is successfully saved and the device is turned off.
7: Charging :
The red light keeps flashing when charging, and the red light stays on when fully charged. When the device is connected to a computer, the red and blue lights stay on.
